Real-time EMS Dashboard
Monitor consumption, demand, power factor, alarms, meter status, and site health from one command center.
Industrial Energy Management Software
Industrial Energy Management, Built for Real Operations
VoltLabs Metering helps facilities connect electrical meters, gateways, and sites into one reliable EMS platform for monitoring, analytics, commissioning, and billing-ready energy data.
- Real-time dashboards for consumption, demand, PF, alarms, and meter health
- Modbus RTU/TCP, M-Bus, and BACnet/IP integration paths
- Gateway and meter commissioning workflow
- Billing-ready data, tariff setup, and export support
- Multi-site customer, building, and meter structure
- Offline-first licensing with controlled modules and users
Contact VoltLabs
+966 55 211 0153
Share your meter list, gateway topology, and site requirements to review EMS integration scope.
Explore FeaturesTotal Consumption6,491.48 kWhCurrent period
Peak Demand123.52 kWToday 14:30
Power Factor0.958Within target
Gateway HealthOnline8 meters reporting
Energy TrendMain incomer · 30 minute intervals
Consumption
Site / Meter ExplorerOperational hierarchy
- Main FacilityHealthy
- Electrical Main Panels4
- LT Panel 01Online
- Switchgear RoomOnline
Gateway Online Readings Validated
Engineering and energy project collaboration
In collaboration with engineering and energy partners
VoltLabs Metering works with ENPOCS to support industrial EMS integration, site coordination, and energy management project delivery.
VoltLabsMETERING
Industrial connectivity
Built for field-connected energy systems
Modbus RTU / TCP
M-Bus
BACnet/IP
RS-485 Networks
Industrial Protocol Gateways
Tariff & Billing Data
Operational platform
Built around the work energy teams actually perform
Monitor, investigate, configure, validate, and prepare commercial data from one controlled environment.
Network Analytics
Compare mains and sub-meters, track trends, detect gaps, and understand performance across panels and facilities.
Gateway & Meter Commissioning
Configure gateways, scan slave IDs, validate registers, assign meters, and commission safely before polling.
Tariffs & Billing Readiness
Prepare validated consumption data, tariff rules, and exports for billing and internal cost allocation.
Multi-site Structure
Model customers, sites, buildings, panels, gateways, and meters with a clear operational hierarchy.
Licensing & Access Control
Control enabled modules, meter limits, app users, and customer access through signed licensing.
Field integration
Connect the field network without replacing your meters
VoltLabs Metering is designed for existing electrical metering infrastructure. Connect panel meters through industrial gateways, validate communication, and build an EMS layer without forcing a full hardware replacement.
Smart Meters & Field Devices
Data collection layer
ElectricityPanel and smart meters
WaterFlow and utility meters
HeatThermal energy meters
GasVolume and pulse meters
Other DevicesCustom field measurements
Protocol Gateways
Communication layer
BACnet/IPBuilding automation networks
ModbusRTU / TCP industrial protocol
M-BusMeter-bus utility networks
Other AdaptersGateway and import profiles
VoltLabs Metering
Energy management platform
Time-series DataStorage and validation
SecurityUsers, roles, and licensing
AlertsMeter and gateway health
DiagnosticsCommunication quality
ReportingAnalytics and exports
Billing & TariffsCommercial data workflows
Site ManagementCustomers and hierarchy
- RS-485 daisy-chain and Ethernet topologies
- Gateway IP, port, and slave ID configuration
- Register mapping and engineering units
- Moxa MGate and other industrial gateway profiles
Implementation methodology
From meter list to live EMS
A controlled sequence for reducing site uncertainty and commissioning risk.
- 01
Review site meter list
Confirm meter models, quantities, locations, and required measurements.
- 02
Confirm gateway and network topology
Map RS-485 chains, Ethernet access, gateway models, ports, and addressing.
- 03
Configure protocols and register maps
Apply communication settings, device templates, and engineering units.
- 04
Test communication and validate readings
Compare live meter displays with decoded values before acceptance.
- 05
Commission meters and enable monitoring
Assign devices to the site hierarchy and begin controlled polling.
- 06
Prepare reports, tariffs, and billing data
Validate intervals and configure the commercial outputs required by the site.
Inside the platform
Operational views for engineering and energy teams
Consistent dark workspaces designed for scanning, validation, and repeated action.
Consumption6,491 kWh
Peak Demand123.5 kW
Power Factor0.958
Gateway Online8 meters healthyReadings Validated
Operations
Dashboard
Live overview of consumption, demand, power factor, alarms, and gateway health.
VoltageFrequencyBalance
Investigation
Analytics
Trend analysis, meter comparison, and data quality review across selected periods.
GatewayProtocolScanAssign
MeterSlave IDRegister mapState
LT Panel 0101PM710Validated
LT Panel 0202PM710Validated
Switchgear Room08EM6436Ready
Field engineering
Gateway Commissioning
Guided setup for gateways, protocols, scans, meter assignment, and validation.
Validated utility records11 metersElectricity, water, and heat
Calculated chargesSAR 45,362.40Configured rate profiles
Utility metersUsageStatus
Electricity184,920 kWhReady
Water1,248 m³Ready
Heat / BTU72.0 MMBtuReady
Commercial operations
Billing & Tariffs
Tariff setup, validated readings, and billing-ready exports when enabled by license.
Commercial workflows
Billing, Tariffs, and Invoice-Ready Outputs
Turn validated meter readings into structured billing records, tariff calculations, and detailed invoice-ready documents.
- Validate billing periods before invoicing
- Apply tariff rules to meter or site groups
- Review consumption, demand, and charges
- Export detailed invoice-ready PDF records
- Keep commercial outputs traceable to meter data
Billing WorkspaceCommercial operations
Billing periodMay 202601 May - 31 May 2026
Rate profilesElectricity / Water / HeatCustomer-configured billing rules
Utility groups311 reporting meters
Validated recordsElectricity + Water + HeatComplete period
Calculated totalSAR 45,362.40Before approval
Utility metersConsumptionRate profileAmountValidation
Electricity184,920 kWhE-INDSAR 35,282.40Ready
Water1,248 m³W-02SAR 7,488.00Reviewed
Heat / BTU72.0 MMBtuH-01SAR 2,592.00Ready
Period validation completeAll interval records are traceable to assigned meters.
Ready for invoice preparation
Review
Generate Invoice
Export PDF
App-side workflow
Validate, calculate, and prepare the commercial record
Billing periods, tariff logic, meter groups, and approval states stay connected to the underlying energy data.
Invoice-ready PDFGenerated commercial statement preview
A4 document
VoltLabs MeteringIndustrial Energy Management Software
ENERGY BILLING STATEMENT
Ready for Review
CustomerAl Noor Industrial Facility
SiteRiyadh Industrial Area
Multi-Utility Meter Summary11 validated meters
Electricity meters8 meters
Electricity consumption184,920 kWh
Water meters2 meters
Water consumption1,248 m³
Heat / BTU meters1 meter
Thermal consumption72.0 MMBtu
Peak Demand62.4 kW
Power Factor Average0.96
ChargesConfigured rate profiles
DescriptionQuantityRateAmount
Electricity consumption184,920 kWh0.18 SAR/kWhSAR 33,285.60
Electrical demand charge62.4 kW32.00 SAR/kWSAR 1,996.80
Water consumption1,248 m³6.00 SAR/m³SAR 7,488.00
Heat / BTU consumption72.0 MMBtu36.00 SAR/MMBtuSAR 2,592.00
Metering / EMS service1 periodSAR 0.00SAR 0.00
SubtotalSAR 45,362.40
VAT / TaxOptional / Configurable
TotalSAR 45,362.40
Deployment outcomes
More control from field setup to commercial reporting
In collaboration with ENPOCS
Software intelligence connected to field execution
VoltLabs Metering provides the EMS software layer for metering, analytics, commissioning, tariffs, and billing-ready outputs. ENPOCS supports engineering and field-facing project coordination across industrial energy environments.
VoltLabsMETERING
Engineering and energy project collaboration
From site requirements to an operational energy management platform
The collaboration connects software delivery with engineering context. Project teams can align meter inventories, network topology, gateway requirements, site access, commissioning priorities, data validation, and commercial reporting needs through one coordinated delivery approach.
SoftwareEMS configuration, data models, analytics, licensing, tariffs, and outputs
EngineeringSite coordination, technical requirements, field constraints, and delivery support
HandoverValidated meters, documented workflows, operational views, and reporting readiness
VoltLabsMETERING
EMS software layer
VoltLabs Metering
EMS software, meter data management, dashboards, analytics, gateway commissioning workflows, licensing, tariffs, and invoice-ready outputs.
- Metering and analytics platform
- Commissioning and gateway workflows
- Commercial data and billing outputs
Field-facing project support
ENPOCS
Engineering and technical services partner supporting power, oil & gas, petrochemical, and industrial energy projects across the region.
- Engineering and technical coordination
- Industrial energy project environments
- Regional field-facing delivery support
Coordinated delivery model
How a project moves from field scope to live EMS operations
Responsibilities remain distinct while project information moves through a shared delivery sequence.
-
01
Define site scope
Review utility meters, locations, protocols, gateways, network access, and required outputs.
-
02
Coordinate integration
Align field requirements, device profiles, register maps, site hierarchy, and commissioning access.
-
03
Configure and validate
Build the EMS structure, connect devices, verify readings, and confirm operational data quality.
-
04
Prepare operational handover
Enable dashboards, analytics, alarms, tariffs, billing records, and documented support workflows.
Industrial environments
Engineering support aligned with complex energy infrastructure
- Power
- Oil & Gas
- Petrochemicals
- Industrial Facilities
- Utilities
- MENA Projects
Project scoping
Discuss your EMS integration scope
Share your meter models, gateway requirements, network access details, and site structure. VoltLabs can review the EMS scope and required commissioning steps.
- Meter list
- Gateway model
- Register maps
- Network IP / VLAN access
- Site hierarchy
- Billing / reporting requirements
Contact VoltLabs
+966 55 211 0153
For EMS integration, meter networking, gateway setup, and commissioning scope.